Restore your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the adjustments or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a easy process that can be performed in just a few steps.

• Initially ensuring your red dot sight is activated.
• Locate the small reset button on the bottom of the sight.
• Use a small object to depress the reset switch for approximately three milliseconds.
• Release the switch and your Holosun EPS Carry Red Dot sight will power cycle.
• The red dot sight should now be set back to its factory settings.

Return to Your Holosun EPS Carry Red Dot back to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to start fresh, resetting it back to standard configuration is a breeze. First, find the tiny button on the side of your optic. Then, sustain it for around five seconds until you see a brief flash. Your Holosun EPS Carry is now returned to its factory settings, ready for precise aiming.

revive your Holosun EPS Carry Back to Action

Is your beloved Holosun EPS Carry experiencing some performance problems? Don't despair! A simple factory reset can often solve the problem and get your red dot sight back to its former glory. Before you begin, remember to remove the battery from your Holosun EPS Carry to prevent unexpected activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these easy steps:

• Simultaneously press and hold the power button for approximately 10 seconds.
• A message will flash, indicating that the reset is in progress.
• Release the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can connect the battery and verify your sight's functionality. If you encounter any further problems, don't hesitate to contactsupport team.

Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Follow these steps carefully to ensure a successful factory reset.

• Beginning with, Energize your Holosun EPS Carry by pressing the power button.
• Subsequently, press and hold both the mode button and the up/down adjustment button simultaneously.
• As you continue holding these buttons, activate the power button once.
• You will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to conclude. This may take a few moments. Once done, your Holosun EPS Carry will automatically power off.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such get more info as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Clear All Settings on Your Holosun EPS Carry

To Original reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Turning a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select this option and confirm the reset. Your sight will then power off and restart with all settings Restored to their default values.

Reset your Holosun EPS Carry with a Factory Original Settings

If your Holosun EPS Carry is acting erratically, a factory reset might be the answer. This will return your sight to its original settings, clearing any custom configurations you've made. To execute this reset, adhere to these straightforward steps:

• To begin, identify the reset button on your EPS Carry.
• Next, engage a small object, like a paperclip, to push the reset button.
• During maintain the reset switch engaged, power on your EPS Carry.
• The sight will display a message indicating that the reset is complete.

Once the reset is successful, your EPS Carry will be returned to its factory settings.

Report this wiki page